To Test The Nobark 18 - SportDOG NoBark 18 Manual De Funcionamiento

To Test the NoBark 18

Important: To avoid feeling the Correction
yourself, never touch the two Contact Points
simultaneously.
1. Turn the Mode Switch to TEST.
2. Hold the unit by the collar with the Indicator Light facing
towards you and fi t the Test Light Tool to the Contact
Points. The unit should be within 6-10 inches of your
mouth.
3. Say "Test" loudly into the Sound Activated Sensor.
4. The Indicator Light and Test Light Tool will fl ash three
times to show that it is functioning properly.
5. If the Indicator Light and/or Test Light Tool do not
fl ash, ensure that the battery is properly installed, and/
or replace the battery.
If the Indicator Light and/or Test Light Tool still do not
fl ash, contact the Customer Care Centre.
6. Return the Mode Switch to Low before replacing the
NoBark 18 on your dog.
Note: The TEST Mode is not intended for normal operation. If
the NoBark 18 is left in TEST Mode while on your dog, it can
cause false correction and may reduce battery life.
8 www.sportdog.com