Dometic Heki 4 Plus Manual De Instrucciones página 32

Heki 4 Plus
Checking the remote control
You can check the remote control using a digital camera with a display:
➤ Point the infrared diode at the camera lens.
➤ Press a button on the remote control.
✓ If the remote control is working, you will see a light from the infrared diode
on the display.
Supplementary to fig. h
NOTE
I
You can only teach one remote control. If you want to teach
another remote control, the first remote control is deleted
automatically.
The red control lamp (1) on the inner frame of the roof light is lit if the roof
light is open. It goes out when the roof light is completely closed and both
runner wedges are locked.
The red control lamp (1) flashes if the power supply to the roof light is
interruptedand then connected again.
Programming the remote control
➤ Point the remote control at the red control lamp of the roof light.
➤ Press the
" and
"
for approx. 5 seconds.
✓ The red control lamp goes out:
Supplementary to fig. i
CAUTION! Beware of injury
!
The rain sensor closes the roof window if it is touched accidently.
To protect against dampness, the roof light is equipped with a rain sensor (1)
which closes the roof completely if it comes into contact with water (such as
rain or condensation).
If you want to stop the window from closing:
➤ Press
" or
" "
EN
" buttons on the remote control at the same time
"
" on the remote control.
Using Heki 4 Plus
29