Dometic Heki 4 Plus Manual De Instrucciones página 30

Heki 4 Plus
See fig. e
➤ Plug the (1) outer frame coupling into the circuit board contact (2) in the
inner frame.
NOTICE!
A
Make sure the polarity is correct:
 Red cable: positive terminal
 Brown cable: earth
➤ Connect the vehicle's 12 V power supply line (3) to the cable of the roof
window (4).
➤ Make sure the lamps are fitted securely.
➤ Check the functions of the window:
– Open the roof light (see "Opening the roof light" on page 30).
– Close the roof light (see "Closing the roof light" on page 30).
– Switch the lighting on and off (see "Switching the lighting on and off"
on page 31).
If faults occur: see "Troubleshooting" on page 33.
See fig. f
➤ Clip on the ventilation grille (1).
It needs to click in.
➤ Clip the lamp covers (2) on the lamps.
They need to click in.
➤ Remove the protective film from both sides of the acrylic glass.
NOTE
I
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
➤ If necessary, enter the new vehicle height and weight in the vehicle
documents.
EN
Installing the Heki 4 Plus
27