Care And Cleaning - FoodSaver V3840 Guía De Referencia

Care and Cleaning

To Clean Appliance:
1. Press the on/off button and unplug before cleaning.
2. Do not immerse in liquid.
3. Open the appliance door (D), while holding the
appliance with two hands, press the two Release
Buttons (J) with your thumbs, rotate the appliance
away from you, and allow the appliance to rest on the
counter.
4. Check the Lower Gasket (L) around the Drip Tray (N)
and the Upper Gasket (P) which surrounds the Upper
Bag Detection Tray (O) to make sure they are free from
food materials and that the lower Foam Gasket is
properly inserted into gasket channel.
Antibacterial Drip Tray & Upper Bag Detection Tray
Empty the Drip Tray after each use (See Fig. 7). Wash in
warm soapy water or place in top rack of dishwasher.
The Food Sensors in the Drip Tray (O) will not function
correctly if liquid is allowed to remain in the Drip Tray.
This appliance has a Tray Full indicator
liquid fills the Drip Tray, the unit will turn off and the
Tray Full Indicator light will activate. To resume normal
operation, open the Appliance Door (D), press the two
release buttons (K), rotate the appliance away from you,
and allow the appliance to rest on the counter. Remove
the the Drip Tray, empty liquid, clean the Drip Tray and
replace in housing. When replacing drip tray, set the
right end of the drip tray into place, then firmly snap
the left side down (See Fig. 8). The appliance can be
used without the Drip Tray, however the Adjustable Food
Sensor setting will not function without the Drip Tray.
6
Clean the Upper Bag Detection Tray after each use. The
Upper Bag Detection Tray (P) is removable for cleaning,
remove by lifting the tabs on each end. Do not pull on
the Upper Bag Detection Flags to remove the Upper Bag
Detection Tray. Clean the Upper Bag Detection Tray by
washing in warm soapy water or placing in top rack of
dishwasher. The upper Bag Detection Tray MUST be
inserted to use the appliance. Without the Upper Bag
Detection Tray, your FoodSaver
the bag when inserted in the Vacuum Channel (E). After
cleaning, hold the appliance with two hands and rotate
upright until the latches lock.
14
Remove For Cleaning
Fig. 7
2
. When excess
Appliance will not detect
®
www.foodsavereurope.com
5. Avoid using abrasive products or materials to clean any
appliance components. These cleaners can scratch the
surface and damage the black foam rubber pads.
6. Use a mild dishwashing soap and a warm, damp cloth to wipe away food residue inside or around
components.
7. Dry thoroughly before reusing.
8. If your appliance features
Firmly Snap in Place
Fig. 8
FoodSaver Accessories
®
1. Wash all FoodSaver
®
a mild dishwashing soap. Do not immerse lids in
water.
2. Dry thoroughly before reusing.
3. FoodSaver Canister bases (but not lids) are top rack
®
dishwasher safe. Canister lids should be wiped down
with a damp cloth.
4. FoodSaver Canisters and FoodSaver
®
Leftover and Sandwich & Snack Containers should not
be used in the freezer.
5. FoodSaver Canisters should not be used in the
®
microwave or freezer.
6. FoodSaver Lunch & Leftover and Sandwich & Snack
®
Containers are microwave and dishwasher safe (top
rack only).
accessories in warm water, using
Lunch &
®