Care & Cleaning; Storage Guide - FoodSaver FM2400 Serie Manual Del Propietário

Ocultar thumbs Ver también para FM2400 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Care & Cleaning
of your Vacuum Sealer
To Clean Appliance:
Remove Power Cord from electrical outlet. Do not immerse in liquid.
Check Gaskets and around Drip Tray to make sure they are free from
food materials. Wipe off Gasket with warm soapy cloth if needed.
Upper and Lower Gaskets may be removed for cleaning. Clean with
warm, soapy water and allow gaskets to dry before reinserting in
machine.
The Removable Drip Tray makes cleanup easy when small amounts of
liquids are pulled into the Vacuum Channel during vacuum process.
Empty Drip Tray after each use. Wash in warm soapy water or place
on top rack of dishwasher. Check for food residues in Drip Tray slot.
Clean if needed. Dry thoroughly before re-inserting into
the appliance.
Handheld Sealer Reservoir:
Empty Reservoir after each use. Wash in warm soapy water. Air
dry before replacing.
To remove Reservoir from Handheld Sealer, holding top portion
(black upper piece) firmly, pull lower reservoir down and off.
11 US: www.FoodSaver.com | CA: www.FoodSaver.ca | MX: www.oster.com.mx/foodsaver
FM2400_22EFSM1.indd 11-12
FM2400_22EFSM1.indd 11-12

Storage Guide

of your Vacuum Sealer
To Store Appliance:
Remove all food around gaskets
Clean unit thoroughly as detailed in 'Care & Cleaning' section.
After the unit has been cleaned and allowed to fully dry, close lid and
push Latch into Store (middle) position. This setting will keep the lid
closed but prevents any undue pressure from being applied to the
internal sealing gaskets of the unit.
Always leave lid latch in Store position when not in use. Never store
lid in Operate position as gaskets may become compressed and unit
will not vacuum bag.
Lift Drip Tray out
Consumer Service: US: 1-877-777-8042 CA: 1-877-804-5383 MX: +52 55 5366 0800
Push the Latch into the center
position to store.
12
2022/2/23 上午9:16
2022/2/23 上午9:16
Tabla de contenido

Solución de problemas

loading

Tabla de contenido