FoodSaver V3840 Guía De Referencia página 7

Features of Your FoodSaver
Power Button
1
1 POWER BUTTON
Press the power button to begin. The Power Indicator,
Speed Indicator and Food Indicator lights will become
illuminated. After Vacuum Sealing, press the Power
Button to turn the appliance Off. Note: After 12
minutes, the appliance will turn Off automatically.
2 TRAY FULL INDICATOR LIGHT
During the vacuum sealing process, small amounts of
liquids, crumbs or food particles can be inadvertently
pulled into the Drip Tray (N). When excess liquid fills
the Drip Tray, the unit will turn off and the Tray Full
Indicator will activate. To resume normal operation,
2
remove the Drip Tray, empty liquid, wash in warm
soapy water or place in top rack of dishwasher. Dry and
replace the Drip Tray in trough. (See Care and Cleaning)
3
MARINATE BUTTON
A ten-minute predetermined sequence of vacuum pulse
to rest ratio-allowing foods to get optimum flavour
infusion in the least amount of time. See "Marinating
with your FoodSaver
®
4 ACCESSORY BUTTON
Press to achieve best vacuum for canisters and
accessories. Push Canister Vacuum Button
begin vacuum process. Motor will run until Vacuum
Sealing Process is complete.
5 SPEED SETTINGS BUTTON
When vacuum sealing delicate items, press the Speed
Setting Button so that the gentle speed indicator
5
light is illuminated. For more control you may press
the Seal Button at any time to stop the vacuum
5
and begin the automatic the sealing process. Note:
Appliance will default to Normal speed upon pressing
the Power On Button or when power has been
interrupted.
6
Marinate Accessory
Button
3
" section on page 10.
4
www.foodsavereurope.com
Appliance
®
Indicator
LEDs
Adjustable
Speed
Food Settings
Button Settings
4 5 6
6 ADJUSTABLE FOOD SETTINGS BUTTON
For optimal vacuuming and sealing of moist or juicy
foods, press the Adjustable Food Setting Button
until the Moist Indicator Light is illuminated. Choose
the dry food setting for foods without liquid.
The Moist Food Indicator light will flash when Food
Sealing Sensors automatically detect any moisture or
liquid in the Drip Tray (N). Note: Appliance will default
to Dry setting upon pressing the Power Button or when
power has been interrupted, unless liquid is detected
in the Drip Tray. (See Care and Cleaning section of this
User Manual).
7 CANCEL BUTTON
Immediately halts the current function opening the
Vacuum Channel.
8 VACUUM PROGRESS DISPLAY
Displays vacuum levels as the bag/canister is
evacuated.
9
SEAL BUTTON
Crush Free Instant Seal feature-
This button has four uses:
1. Press to immediately stop the vacuum process
to
and begin sealing the bag. This prevents crushing
delicate items such as bread, biscuits and pastries.
2. Press to create a seal when making bags from
a FoodSaver
3. Press to create a seal on most Mylar bags (such as
a potato crisp bag) to keep food sealed airtight.
SEAL INDICATOR LIGHT
10
Constant Red light indicates sealing process is
engaged. (Flashing light indicates error)
2
Tray Full
Indicator
Cancel
Button
7
Roll.
®
8
Seal
Button
9
Vacuum
Progress
Display
Seal Indicator
10
6