Before First Use; Preparing For Use; Inserting The Battery - Silvercrest 60530 Instrucciones De Utilización Y De Seguridad

Báscula de baño
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

open them. Overheating, fire or
destruction of the batteries might
result. Never throw batteries into
fire or water. The batteries might
explode.
Avoid extreme environmental
conditions and temperatures as
they may affect batteries e.g.
above radiators. Otherwise the
batteries are more likely to leak.
Exhausted or damaged
batteries can cause caus-
tic burns upon contact with the
skin. To avoid this, always wear
suitable protective gloves in
these circumstances!
Avoid contact with the skin, eyes
and mucous membranes if fluid
is leaking from a battery. If you
come into contact with corrosive
battery fluids, flush the affected
area thoroughly with clean wa-
ter and contact a doctor immedi-
ately.
Remove the battery if you are
not going to use the device for
an extended period.
When inserting the battery, en-
sure the correct polarity! This is
shown in the battery compart-
ment.
Remove a spent battery immedi-
ately from the device. There is
an increased danger of leaks!
22 GB/MT
60530_silv_Personenwaage_content_ES_IT_PT.indd 22
Batteries must not be disposed
of in the normal domestic waste!
Every consumer is legally
obliged to dispose of batteries
in the proper manner!
Keep batteries away from chil-
dren; do not throw batteries in
the fire, short-circuit them or take
them apart.
If the above instructions are not
complied with, the battery may
discharge itself beyond its end
voltage. There is then a danger
of leaking. If the battery has
leaked inside your device, you
should remove it immediately in
order to prevent damage to the
device!

Before first use

Removing the insulation strips
Note: The product is supplied with the battery
already in place. Remove the insulating strip between
the battery and battery contacts before first use.

Preparing for use

Inserting the battery

S ee Fig.
and
.
4
5
I f the scales do not appear to work, check that
the battery has been inserted correctly and
reinsert it if necessary.
Note: The display indicates when it is time to
replace the battery. When you step on to the
scales and the battery is too weak, the LC display
16.04.14 08:36
Tabla de contenido
loading

Tabla de contenido