Remote Control Transmitter - Hitachi CP-X958W Manual De Instrucciones

Names and functions of each part (continued)

Remote control transmitter

VIDEO, RGB button
Press to switch the input. (Refer to page 13, 19.)
STANDBY / ON button
Used to turn the power on and off.
Press for 1 sec. or more to turn the power off
(enter standby status).
(Refer to pages13 and 14.)
* DISK PAD / MOUSE button
(1) Used to select menu items when the menu
screen is displayed (refer to page 16 - 18).
(2) When the menu is not displayed, the mouse
shift function and left click function are active.
(3) After the POSITION button has been
*1
pressed, the screen can be moved upward,
downward and to the left and right.
MENU button
*
Used to turn the menu screen display on and off.
(Refer to page 17 - 21.)
MAGNIFY button
*
Used to magnify the displayed image.
(Refer to page 16.)
* P in P button *2
Used to turn P in P (Picture In Picture: displays sub video
signal images in the RGB signal) on and off.
Each time this button is pressed, operation will change in
the following sequence:
(1) Reduce sub screen (2) Magnify sub screen (3)Off.
(1) ∼ (3)
(Refer to page 20.)
BLANK button
Used to turn blanking on and off.
(Refer to page 20.)
FOCUS button
Used to adjust the focus of the image on the
screen. (Refer to page 13.)
These functions do not operate when initial screen message "NO INPUT IS DETECTED" or "SYNC IS OUT OF RANGE" is displayed.
*
*1 POSITION icon
When the POSITION button is pressed, the moving display icon
will appear at the bottom right of the screen.
While displaying the icon, you can operate POSITION.
*2 P in P function
With the P in P function, signals are input to both RGB and
VIDEO. This function operates only when the RGB signal has
been selected. There is no display in the case of the no signal and
when the RGB signal is outside the sync range.
When P in P is used, audio is automatically switched to video.
In P in P, audio input can be switched by pressing the VOL
VOL keys of the remote control, displaying the audio bar and
moving DISK PAD left and right during the display.
10
VIDEO
STANDBY/ON
*4
MENU
MAGNIFY
P in P
BLANK
FOCUS
and
R G B / V I D E O
LASER button
Turns the laser beam on and off. Refer to page
RGB
LASER
11 conceming usage and observe the cautions.
POSITION
POSITION button
*
Press Position, then use the mouse Disk Pad to adjust
the image position (RGB mode only).
(Refer to page 16.)
* RESET / MOUSE RIGHT button
(1)Operates as the RESET button when the menu
is displayed. Press this button to return to the
initial settings.
RESET
(2)Used to click the right mouse button when the
menu is not displayed (refer to page 25,26).
*1
FREEZE (3)Pressing this button after scrolling the screen
with POSITION returns the screen to the original
VOLUME
position.
OFF
* FREEZE button
MUTE Used to turn the freeze (still) image display on and off.
(Refer to page 15.)
AUTO TIMER
VOLUME button
Adjusts the volume of the sound. Press [
increase the volume and (
ZOOM
When there is no video signal input, operation is not
possible when the input video signal is outside the
sync range.
MUTE button
*
Applies Mute. (Press the Play button again to
cancel.)
TIMER button
Turns the display of the time set with the Timer
on the Menu screen on and off.
The timer is not displayed when no input signal
is detected or when SYNC is out of range or
during blanking or during freezing.
Refer to page 21 concerning the method used to
set the timer.
ZOOM button
Used to adjust the size of the image. (Refer to
page 13.)
AUTO button
*
Used to execute auto-adjust.
*3 Auto adjustment function
The projector automatically adjusts 4 items (V. POSIT, H. POSIT,
H. PHASE, H. SIZE).
When you choose AUTO (move the cursor to the right from the
manual operation position), the AUTO confirmation menu shown
below is indicated.
*4 Disk Pad method of operation
• Move and select by tilting Disk Pad in the required direction.
• Press Disk Pad in to realize the function of the mouse left
button.
• A mouse cable is necessary if a mouse is to be used.
(Refer to pages 26, 27.)
] to
) to decrease the volume.
*3