Stihl RMA 370 Manual De Instrucciones página 25

Always check the mounting screw (1)
when replacing the blade.
WARNING
To reduce the risk of blade detachment
and resulting injury, always replace a
damaged mounting screw.
RMA 370
Mowing blade
a
1
Use a caliper gauge to check blade
N
thickness at a minimum of 5
different points.
Place a ruler on the front edge of the
N
blade and measure how far it has
been filed back.
Blade thickness must not be less than
a = 0.06 in (1.6 mm) at any point.
Cutting edges may be filed back no
more than b = 0.2 in (5 mm).
Mulching blade
a
b
Use a caliper gauge to check blade
N
thickness at a minimum of 5
different points.
Place a ruler on the rear edge of the
N
blade and measure how far it has
been filed back.
Blade thickness must not be less than
a = 0.06 in (1.6 mm) at any point.
Blade width at the cutting edges must be
a minimum of b = 0.87 in (22 mm).
English
b
b
23