Cleaning And Maintenance - Powerfix Profi HG00962A Instrucciones De Utilización Y De Seguridad

Ocultar thumbs Ver también para HG00962A:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
Electrostatic discharge could result in malfunctions.
j
When such malfunctions occur, remove the battery for a
short while and re-insert.
Failure
Five digits flash
simultaneously
every second.
The LCD dis-
play
does
5
not continue to
count.
Nothing is dis-
played on the
LCD display
§ Cleaning and maintenance
j
Clean the calliper before and after using it with a dry cloth;
never use petrol, solvents or cleaning agents.
j
Do not immerse the calliper into water. Liquids can damage
the calliper.
j
Always switch the LCD display off when not using the calliper.
This will extend the life of the battery.
j
Keep away from electrical current and electrically charged
pens to prevent damage to the chip.
24
GB/IE
Cause
The battery voltage
is lower than 2.7 V.
Faulty wiring or
circuit.
1. LCD display is
switched off.
.
2. Battery is the wrong
5
way round or the
battery contact is
poor.
3. The battery voltage
is lower than 2.1 V.
Solution
Replace the battery
in line with the chap-
ter on "Inserting /
replacing battery".
Remove battery
and re-insert after
30 seconds.
1. Switch the LCD
display on by
pressing the ON /
OFF key
10
2. Remove the bat-
tery and insert /
replace it in line
with the terminals
and the chapter
"Inserting / replac-
ing the battery"
so that it touches
all contacts.
3. Replace the bat-
tery in line with
the chapter "In-
serting / replac-
ing the battery".
.
Tabla de contenido
loading

Tabla de contenido