Tabla de contenido
OBJ_BUCH-1841-002.book Page 12 Tuesday, June 11, 2013 1:11 PM
12 | English
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is intended for dry sanding, structuring and
polishing metal.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Adjustment screw for belt run
2 Spindle lock
3 Auxiliary handle (insulated gripping surface)
4 On/Off switch
5 Clamping lever for sanding attachment
6 Thumbwheel for belt speed preselection
7 Drive roller
8 Attachment cover
9 Fastening screw for attachment cover
10 Sanding attachment
11 Guide element*
12 Sanding belt*
13 Guide roller
14 Supporting surface
15 Handle (insulated gripping surface)
16 Sanding arm*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
3 609 929 C46 | (11.6.13)
Technical Data
Electric File
Article number
Rated power input
Belt speed at thumbwheel setting
– 1
– 2
– 3
– 4
– 5
– 6
Sanding belt length
Sanding belt width
Belt speed preselection
Soft start
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 89 dB(A); Sound power level
100 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
2
a
=2 m/s
, K=1.5 m/s
.
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
GEF 7 E
3 601 HA8 0..
W
720
m/s
3.5
m/s
5.0
m/s
7.0
m/s
9.0
m/s
10.5
m/s
12.0
mm
457
mm
6/13/20
kg
2.0
/II
Bosch Power Tools
Tabla de contenido
