Introduction; Proper Use; Features And Equipment - Parkside PEH 30 A1 Instrucciones De Utilización Y De Seguridad

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
V ~
Volt (AC)
W
Watts (Effective power)
Electric planer PEH 30 A1
© Introduction
We congratulate you on the purchase
of your new device. You have chosen a
high quality product. The instructions for
use are part of the product. They contain important
information concerning safety, use and disposal.
Before using the product, please familiarise yourself
with all of the safety information and instructions
for use. Only use the unit as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.
©

Proper use

The device is suitable for planing wood in the form
of beams or boards or the like if the workpiece is
held securely in a fixed position. The device is also
suitable for chamfering edges and for rebating.
Any other use or modification to the device shall be
considered as improper use and could give rise to
considerable risk of accident. The manufacturer will
not accept liability for loss or damage arising from
improper use. Not suitable for commercial use.
36 GB/MT
n
Design no-load speed
0
Safety class II
Wear hearing protection, dust protec-
tion mask, protective glasses and
protective gloves.
Keep children away from electrical
power tools!
Check that the device, mains lead
and plug are in good condition!
Dispose packaging and appliance in
an environmentally-friendly way!
©

Features and equipment

Safety lock-out
1
ON / OFF switch
2
Planing debris removal port (right / left selectable)
3
4 Belt cover
5 Belt cover screws
6 Guide fence
Guide fence fixing screws
7
Fixing nut for setting rebate width
8
Sole
9
V-groove
10
Rebate depth stop fixing screw
11
Rebate depth stop
12
Rotary control for setting planing depth
13
Cutting depth scale
14
15 Reducer piece
16 Parking shoe
17 Blade shaft
Cutting element
18
Plane blade fixing screws
19
Plane blade
20
Side blade shaft guard
21
Allen key
22
Drive belt
23
Large belt wheel
24
Small belt wheel
25
26 Open spanner