Push-Button Functions - SportDOG NOBARK 10R Manual De Funcionamiento

PUSH-BUTTON FUNCTIONS

The NoBark
™
current Operating Mode, and change the Operating Mode.
Task
Turn the
collar on
Turn the
collar off
Display current
Operating Mode
Change active
Operating Mode
* If you continue to push the button for more than 5 seconds, you will begin changing modes.
** The light will flash every five seconds to indicate the current mode.
10
10R has a single push-button that allows you to turn the unit on and off, display the
Steps to perform
Press and release the push-
button while the unit is off.
Press the push-button until the
display goes blank and the red
light comes on. Then, release
the push-button.*
Press and hold the push-button
for less than 2 seconds.
1. Press and hold the push-
button for 5 seconds.
2. Continue to hold the push-
button to advance to the
next available mode.
3. When the desired mode is
displayed, release the
push-button.
4. Once the push-button
has been released for 5
seconds, the new Operating
Mode will go into effect.
5. If the push-button is
released too early, simply
press it again within
5 seconds.
Indications
The light will flash green five times
and then will display the current
Operating Mode.
The light will flash red four times
and the unit will turn off.
The unit will display the current
Operating Mode and the
battery condition.
Mode will advance and be displayed.
Every 2 seconds the mode will
advance and be displayed.
The selected mode will be displayed.
The display will flash four times
and then the unit will resume
normal operation using the new
Operating Mode.**
The mode will advance and continue
as described in Step 2.
SPORTDOG.COM