Push-Button Functions - SportDOG NoBark 10R Manual De Funcionamiento

push-ButtON fuNctiONs

the nobark™ 10r has a single push-button that allows you to turn the unit on and off, display
the current operating mode, and change the operating mode. the following table describes how
to perform the different tasks.
task
turn the collar on
turn the collar off
display current
operating mode
change active
operating mode
*
If you continue to push the button for more than 5 seconds, you will begin changing modes.
**The light will flash every five seconds to indicate the current mode.
All manuals and user guides at all-guides.com
steps to perform
Press and release the push-
button while the unit is off.
Press the push-button until the
display goes blank and the red
light comes on. then, release
*
the push-button.
Press the push-button and hold
it for less than 2 seconds before
releasing it.
1. Press the push-button and
hold it for at least 5 seconds.
2. continue to hold the push-
button to advance to the next
available mode.
3. When the desired mode is
displayed, release the
push-button.
4. once the push-button has
been released for 5 seconds,
the new operating mode will
go into effect.
5. if the push-button is released
too early, simply press it
again within 5 seconds.
WWW.spORtdOg.cOM
indications
the light will flash green five times
and then will display the current
operating mode as described on
previous page.
the light will flash red four times and
stop operating.
the unit will display the current
operating mode, as described on
previous page, and the battery
condition.
- mode will advance and be displayed
as described on previous page.
- every 2 seconds the mode will
advance and be displayed.
- the selected mode will be displayed
during this time.
- the display will flash four times and
then the unit will resume normal
operation using the new operating
mode.**
- the mode will advance and con-
tinue as described in step 2.
9