After The Calc-Clean Process; After Ironing - Philips Mistral GC2225 Manual De Instrucciones

6 Hold the iron over the sink and set the steam control to
position 1 (Calc-Clean).The steam control knob will spring up
slightly.
C
7 Pull the steam control knob upwards to remove the steam
control needle.
C
8 Move the iron to and fro.
Steam and boiling water will come out of the soleplate. Impurities and
B
scale (if any) will be flushed out.
C
9 Use vinegar to remove scale, if any, from the needle.
Do not bend or damage the steam control needle.
C
10 Put the steam control needle back by inserting the point of the
needle exactly in the centre of the hole and by fitting the small
projection on the side of the needle into the slot. Set the
steam control knob to position O.
11 Repeat the Calc-Clean process if the iron still contains a lot of
impurities.

After the Calc-Clean process

1 Plug the iron in to let the soleplate dry up.
2 Unplug the iron when the amber pilot light has gone out.
3 Move the iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
4 Let the iron cool down before you store it.

After ironing

1 Remove the mains plug from the wall socket and let the iron
cool down.
ENGLISH
9