Operational Steps - Haier HDY6-1 Manual Del Usuario

English

Operational Steps

1. Turning on Power
Operating power supply is (220-240)V~/60Hz.
2. Laundry Loading
Open the door and place the laundry into the drum of the dryer. To save
energy and achieve a better drying result, please spin dry the laundry during
washing as dry as possible. Place the laundry evenly into the drum after
shaking it loose.
Note: Do not put excess laundry into the dryer to avoid damage to the dryer
and laundry.
3. Setting Drying Program
Turn the program knob to set an optimal drying program according to the
laundry type and the drying result desired to achieve.
4. Low Temp Setting
For delicate laundry that needs special care, choose this function. Once this
function is selected, the drying program will operate with a low heating power
and the drying temperature will be low too. The drying time will automatically
increase by 20 minutes.
5. Wrinkle Saver Setting
You may choose this function to prevent wrinkles from setting in the clothes.
6. Program Operation
After a program is set, gently touch the Start/Pause button to start
the program.
7. Program Completion
Before the drying program comes to an end, the dryer will enter in the cold
air cycle where the heating will stop.
After the program is complete, the display screen will display "End" and a
beeping sound will alert you. Open the door to remove the laundry.
When wrinkle saver function is chosen, if the laundry is not removed in time
after the drying program is complete, the dryer will start in the anti-wrinkle
protection cycle automatically.
In the anti-wrinkle protection cycle, the dryer's drum will run in a set interval to
keep your laundry loose.
8. Turn off the Dryer
Turn the program knob to the "OFF" position to cut off the power supply and
turn off the dryer.
25