Assembling The Lid Knob; Automatic Temperature Controller; Rating Plate - CASO DESIGN 1491 Operación Manual

13.2 Assembling the lid knob

13.3 Automatic temperature controller

1 temperature sensor
2 electric plug
3 electric cable
4 temperature regulator
The automatic temperature controller is a highly sensitive part. Therefore, it is advisable to
make sure that it does not fall down, be pushed or be shaken.
Only use the automatic temperature controller which has been supplied with the appliance.
Never use a different controller.
When connecting the automatic temperature controller make sure that it has been plugged
in correctly. Do not pull the cable but the plug of the temperature controller. Do not handle
with exaggerated force or bend.
Always keep the temperature controller and the pin of the holder clean.
Turn off and immediately stop using the automatic temperature controller in case it is
damaged or overheated. Do not repair by yourself. Take the appliance to the next
authorised dealer and have it repaired
Before using or removing the automatic temperature controller make sure that the scale is
turned off as it may otherwise lead to overheating or failure.
13.3.1

Rating plate

The rating plate with the connection and performance data can be founded on the back of
the device.
a lid knop
b plastic ring
c glass lid
d washer
e silicone ring
f screw
Please note
► Tighten the screw of the handle only carefully, to
prevent breaking of the glass.
33