Specifications; Infrared Remote Control - Pioneer DEH-P9450MP Manual De Operación

Additional Information
S
pecifications
General
Power source .............. 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system .......................................... Negative type
Max. current consumption ........................................ 10.0 A
Dimensions
(DIN) (chassis) ...... 178 (W) × 50 (H) × 157 (D) mm
(nose) ............ 188 (W) × 58 (H) × 24 (D) mm
(chassis) ...... 178 (W) × 50 (H) × 162 (D) mm
(D)
(nose) ............ 170 (W) × 45 (H) × 19 (D) mm
Weight ...................................................................... 1.7 kg
Audio/DSP
Continuous power output is 22 W per channel min. into 4
ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 50 W × 4
Load impedance ............................ 4 Ω (4 – 8 Ω allowable)
Preout maximum output level/
output impedance .................................... 6.5 V/100 Ω
Loudness contour ........ +10 dB (100 Hz), +6.5 dB (10 kHz)
Equalizer (13-Band Graphic Equalizer)
Frequency .................. 50/80/125/200/315/500/800 Hz
Equalization Range ................................ ±12 dB (2 dB)
Auto Equalizer (Just for standard mode)
(Front & Rear & Subwoofer 13-Band Graphic)
Frequency .................. 50/80/125/200/315/500/800 Hz
Equalization Range ...................... +6 — –12 dB (2 dB)
Network (Standard mode)
HPF (Front/Rear)
Frequency .......................... 50/63/80/100/125 Hz
Slope ................................................ –12 dB/oct.
Subwoofer output
Frequency .......................... 50/63/80/100/125 Hz
Slope ................................................ –18 dB/oct.
Gain .............................. –24 dB — +6 dB (1 dB)
Phase .......................................... Normal/Reverse
Network (3-way network mode)
HIGH HPF
Frequency
..............1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Slope ............................................ –6/–12 dB/oct.
Gain ........................ –24 dB — 0 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse
57
(volume: –30 dB)
1.25/2/3.15/5/8/12.5 kHz
1.25/2/3.15/5/8/12.5 kHz
MID HPF/LPF
Frequency (LPF)
..............1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Frequency (HPF)
................31.5/40/50/63/80/100/125/160/200 Hz
Slope (LPF) .................... 0 (Pass)/–6/–12 dB/oct.
Slope (HPF) ............ 0 (Pass)/–6/–12/–18 dB/oct.
Gain ........................ –24 dB — 0 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse
LOW LPF
Frequency
................31.5/40/50/63/80/100/125/160/200 Hz
Slope .................................... –6/–12/–18 dB/oct.
Gain ...................... –24 dB — +6 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse
CD player
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format ...................... Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Frequency characteristics ................ 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ............ 94 dB (1 kHz) (IEC-A network)
Dynamic range .............................................. 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
MP3 decoding format ........ MPEG-1 and 2 AUDIO LAYER-3
WMA decoding format .................................... Ver. 7 and 8
FM tuner
Frequency range ........................................ 87.5 – 108 MHz
Usable sensitivity ........................................................ 9 dBf
(0.8 µV/75 Ω, mono, S/N: 30 dB)
50 dB quieting sensitivity .......................................... 15 dBf
Signal-to-noise ratio ........................ 70 dB (IEC-A network)
Distortion ............................ 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range .......................... 531 – 1,602 kHz (9 kHz)
Usable sensitivity .................................. 18 µV (S/N: 20 dB)
Selectivity .................................................... 50 dB (±9 kHz)

Infrared remote control

Wave length .............................................. 940 nm ±50 nm
Output ........ typ; 12 mw/sr per Infrared LED (2 LEDs used)
Note:
• Specifications and design are subject to modifica-
tion without notice for the sake of improvements.
(1.5 µV/75 Ω, mono)
530 – 1,640 kHz (10 kHz)
50 dB (±10 kHz)