User Guide; Safety Instructions - Outdoorchef CITY ELECTRO 420 Guia Del Usuario

Manual City Electro 420_Layout 1 26.01.10 15:29 Seite 9
CITY ELECTRO 420
❶
Heating coil
❷
Replaceable aluminium protective foil
❸
Heat reflector
❹
Drip pan
❺
Temperature control
WARNING: Electric shock
The following nominal values apply to this
appliance:
230 volts – 50/60 Hz
Power rating: 2000 W
The appliance must be connected to an earthed mains
socket.
The appliance must be connected via a residual cur-
rent device (RCD) with a maximum nominal trip rating
of 30 mA.
The power cable must be checked at regular intervals
for signs of damage. The appliance must not be used
with a damaged cable.

User guide

IMPORTANT:
immediately write the
serial number of your
electric kettle barbecue
on the back of this user
guide. You will find the
number below the tem-
❶
perature control and on
the packaging.
serial number is impor-
❷
tant for an unproblematic handling of enquiries,
ordering spare parts and any warranty claims.
Keep the user guide in a safe place. It contains
important information relating to safety, opera-
❸
tion and maintenance.
Please carefully read through these instructions prior
❹
to using your OUTDOORCHEF electric kettle barbe-
cue for the first time. Failure to observe the safety
instructions, warnings and precautionary measures
❺
provided in this user guide may lead to serious or
even fatal injuries or to damage to property as a result
of fire or explosion.

Safety instructions

• Do not use any charcoal or other combustible fuels
for this barbecue. This barbecue is not designed to
be used with charcoal or other combustible fuels and
can otherwise cause a fire. The fire may render the
barbecue unsafe and damage it.
• The barbecue is intended for outdoor use only.
• Take care to ensure that it is kept away from combus-
tible materials such as paper, partitions, curtains,
cloths, chemicals, etc.
• The appliance must only be connected and operated
in accordance with the details on the model name-
plate.
• Do not use the appliance if the power cable, the
mains socket or the appliance show any sign of
damage. Check these every time before the appli-
ance is used.
• Always connect the heating element to the tempera-
ture control before you connect the power cable to
the mains socket. The «UP» symbol on the heating
element must be legible.
• The appliance must only be connected to an eart-
hed mains socket.
• Do not use the appliance if the socket is damaged.
• Make sure that no other appliances with high power
consumption are connected in the same electric cir-
cuit when the barbecue is in use.
• Always pull out the plug after each use, or if there is a
fault. WARNING: Pull on the plug itself, and not on
the power cable.
Please
The
9