Blower Operation - Honda HHB25 Manual Del Propietário

8. BLOWER OPERATION

Read and understand the safety instructions on pages 4 to 9 before
operating the handy blower.
If you notice any abnormal sound, smell, vibration or other unusual signs,
stop the engine immediately and consult your authorized Honda dealer.
To reduce the risk of injury from contacting with rotating parts, stop
the engine before installing or removing any attachments.
Assembling and removing the blower tube and nozzle
1. Align the lugs on the blower port of the handy blower with the
grooves in the blower tube or nozzle, and push it onto the blower
port. Turn the blower tube or nozzle in the direction shown with the
arrow until it locks.
2. Check the blower tube and nozzle for looseness and that they are
locked in position.
NOTE:
Check the blower tube and nozzle for looseness and locked in position.
Do not use the handy blower if it is loose. Damaged blower can cause
a personal injury or equipment damage.
GUARD
(ET1, EWT1 types only)
3. Removal is the reverse order of installation.
CAUTION:
Do not run the engine with the blower tube and nozzle removed from
the handy blower. The engine speed drops possibly causing engine
malfunction.
30
LUGS
GROOVE
BLOWER TUBE
or NOZZLE
BLOWER TUBE
or NOZZLE
LOCK POSITION