Honeywell Miller Instrucciones De Uso página 11

SELF-RETRACTING LIFELINE FALL
[Calculation taken from work level]
+
CAUTION:
Read all notes and refer to all
self-retracting lifeline fall clearance diagrams
IMPORTANT NOTES:
Self-retracting lifelines must be anchored
clearance calculation and related information.
can affect fall distance when using a retract-
able device.
The self-retracting lifeline fall clearance cal-
culation assumes the user is standing. If the
39 in (1m)
42 in (1.1m)
*This chart shows general minimum fall clearances required. An exact calculation, based on the SRL to be used and an
assessment of the work site and conditions that may affect the worker's fall clearance, must be performed.
**CSA=39 in (1m); OSHA/ANSI=42 in (1.1m)
(see
In Standing
Crouched
Position
Position
6 ft-3 in
(1.9m)
6 ft-6 in
(2m)
The self-retracting lifeline fall clearance cal-
culation also assumes the user is working
the worker must increase the fall clearance
distance to account for the swing fall factor.
If there is any question about
calculating fall clearance distance,
please contact Honeywell Technical Service:
-
Position
9 ft-3 in 11 ft-3 in
(2.8m) (3.4m)
9 ft-6 in 11 ft-6 in
(2.9m) (3.5m)
In Potential
Swing Fall Position
Varies - Additional Fall
Clearance Required
-
-
-
11