This appliance is intended for professional use and should be used by trained and qualified personnel
only.
Electrical Shock Hazard
Disconnect power before
cleaning blender base.
Failure to follow these
instructions can result in
death or electrical shock.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
Cut Hazard
Always place lid on container when
blending.
Do not put hands, spoons, or other
utensils in container when blending.
Failure to follow these instructions can
result in broken bones, cuts, or other
injuries.
The EC declaration of conformity for this appliance is available in the Technical Support section
of our website www.commercial.hamiltonbeach.com.
98
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this drink mixer signifies that this appliance should be taken
over by a selective collection system conforming to the Guideline 2012/19/EU (WEEE) so that it
can be either recycled or dismantled in order to reduce any impact to the environment. The user is
responsible for returning the product to the appropriate collection facility, as specified by your local
code. For additional information regarding applicable local laws, please contact the municipal facility
and/or local distributor.
Sanitize using 1 Tablespoon (15 ml) of household
bleach per 1 gallon (3.8 liter) of clean, cool water
(60°F/16°C), mixed according to the instructions
on the bleach.
1. Fill container with sanitizing solution, replace
2. Wipe exterior with soft cloth dampened with
3. Immerse lid and filler cap in sanitizing solution
4. Place empty container on base and run on HIGH
5. When ready to use, rinse with clean water.
98
Technical Services
For assistance or replacement parts, call our
Technical Services number:
++910-693-4277
www.commercial.hamiltonbeach.com
Burn Hazard
Always use caution when blending
hot contents.
Failure to follow these instructions can
result in burns.
Sanitizing
lid and filler cap and run on LOW speed for
2 minutes. Empty container.
sanitizing solution.
for 2 minutes.
speed for 2 seconds to remove any moisture
from the cutter assembly.
99
100
3