Batteries - SURE petcare SureFeed Manual Del Usuario

Batteries

Always use 4 x good quality 1.5V alkaline C cell batteries. This will ensure the best performance
of your Microchip Pet Feeder Connect. This product is NOT designed for use with rechargeable
batteries. To insert or change the batteries please follow the steps below:
There is a light near the rear of the Feeder. If the batteries are low, or if there's
a problem with how they've been inserted, this light will flash red every 5 seconds.
1
Turn the Feeder upside down to access
the battery compartments.
3
+
–
Insert the batteries. Ensure the +/- symbols
on the batteries match the symbols on
Once you program your pet's microchip ID into the Feeder it will be permanently
stored in its memory. This means that even when you change the batteries,
the Feeder will still recognise your authorised pet.
11
the Feeder itself.
2
Remove the battery covers.
4
+
–
Replace the battery covers.