How To Use - babymoov A002051 Instrucciones De Uso

a. Lid's handle
b. Lid
c. Bottles stand
At home
1. Open the lid (b) thanks to its handle (a).
2. Take out the measuring cup (d). Fill it with water, following the quantities instructions below.
3. Remove the stand (c).
4. Remove the grille (f) from the bottle warmer.
5. Pour the water into the water tank.
6. Put the grille (f) back on the tank.
7. Hold the grille's handle (g) to CLOSE the grill by turning it anti-clockwise. This will ensure that the steam goes through the steam
"steam tongue" (d).
8. Put the stand (c) in the bottle warmer.
9. Insert the measuring cup/steam tongue (d).
10. Place the bottle inside the stand, without teat and cap.
11. Close the lid (b).
12. Lock it by turning it anti-clockwise.
13. Plug the appliance into mains. Press the "On" button (e) to start the cycle. The lamp will illuminate to show that the appliance is
working. It will go out automatically and an audible alarm will tell you that the cycle is complete.
14. Hold the lid's handle (a) and turn it clockwise to unlock the lid.
15. Remove the bottle or jar carefully; it will be hot.
16. For a bottle, add the milk powder, and place the teat and cap on the bottle. Shake it to ensure an even temperature and to mix the
milk with the water.
17. Always check the temperature of the food before giving it to your baby.
In car
- Stop the car / vehicle and keep the engine running.
- Place the Bottle Warmer on a flat and stable surface inside your car and vehicle.
- Then carry out steps 1 to 17 described above, taking care to reduce the amount of water in the measure by a few millilitres (between 2
and 4ml), and replacing step 13 by the following instructions:
13. Connect the Car Adaptor Plug (h) on to the power cord of the bottle warmer. Plug the Car Adaptor Plug into the cigarette socket.
Press the "On" button (e) to start the cycle. The lamp will illuminate to show that the appliance is working. It will go out automatically
and an audible alarm will tell you that the cycle is complete.
The heating cycle will take longer than when using at home (average time: 10 minutes).
d. Measuring cup / steam tongue
e. « On » button
f. Grille
Amount of milk
measuring cup for BW
in the bottle
for bottle content in
room temperature
60 ml
90 ml
120 ml
150 ml
180 ml
210 ml
240 ml
270 ml
300 ml
330 ml
Amount of water to be
put in the measuring
Jar
cup for BW for baby jar
in room temperature
120 g
200 g
250 g
CAR/HOME TURBO STEAM BOTTLE WARMER • Instuctions for use
COMPOSITION

HOW TO USE

BOTTLE WARMER
Amount of water
to be put in the
measuring cup for BW
fridge temperature
6 ml
8 ml
9 ml
9.5 ml
10 ml
11 ml
12 ml
13 ml
14 ml
15 ml
for BW for baby jarin
fridge temperature
10 ml
13 ml
18 ml
g. Grille's handle
h. Car adaptor plug
Amount of water
to be put in the
for bottle content in
11 ml
12 ml
13 ml
14 ml
15 ml
15.5 ml
16 ml
16.5 ml
17 ml
18 ml
Amount of water
to be put in the
measuring cup
16 ml
18 ml
25 ml
11