Tabla de contenido
ENGLISH
Displays
BLANK DISC [BLANK]
Can't EDIT [ERROR]
Can't COMBINE
Can't DIVIDE
Can't REC
DIGITAL IN, UNLOCK
DISC ERROR
DISC FULL [FULL]
DISC PROTECT
EMERGENCY, STOP
F17
HOLD
LOW BATTERY, U01
NO DISC [NoDISC]
Playback DISC
Can't COPY, SCMS
SYSTEM ERROR
TOC Reading [T-READ]
TRACK NUMBER, NOT
EQUAL
TITLE FULL [FULL]
UTOC FULL [FULL]
UTOC Writing [WRITE]
Remote control displays indicated inside [ ].
A blank disc has been inserted.
The reason is shown on the lower line of the display.
The limitations of the system sometimes mean tracks cannot
be combined.
The limitations of the system sometimes mean tracks cannot
be divided.
The reason is shown on the lower line of the display.
Check the digital optical fiber cable connections and try again.
There is a problem with the disc and it needs to be replaced.
The maximum time or number of tracks has been reached.
Either erase some tracks or record with another disc.
The write protect hole is open. Close it to enable recording
and editing.
A problem occurred during recording. Eject the MD, reinsert it
and start recording from the beginning again.
There is a problem with the magnetic head.
The hold function is on.
The batteries have run down.
A disc has not been inserted.
The disc can only be used for playback. It cannot be recorded
on or edited in any way.
You are trying to make a second copy of a digital recording.
The self diagnosis function has found an error.
Reading TOC information.
The number of titles doesn't equal the number of titles on the
target disc. Make the number equal.
You are trying to enter the text beyond 100 characters.
The display appears for one of the following reasons:
≥The maximum number of tracks (254) has been reached;
erase unneeded titles to make room.
≥Due to limitations of the recording system, UTOC may
become full before the maximum number of tracks or time
capacity is reached. Replace the MD.
≥The section reserved for text information is full;
erase unneeded titles to make room.
UTOC is recorded.
75
Tabla de contenido
