Tabla de contenido
ABB-Welcome
Set the Wiegand format
1. Swipe admin card to enter system setting. (Orange LED is on.)
2. Short press 1st button to change the Wiegand format to 26 bit or 34 bit. (Default is 26 bit.)
The different format is indicated by the LED and sound feedback.
Switch off validation
In some case, the users only register cards as a third party and not on outdoor station. When
the users swipe these cards at the outdoor station the door will be opened, but a warning
indication will be displayed on display module. It is not necessary to play this warning.
Therefore, validation needs to be switched off so that wrong indication on display module will
not appear, even though the card is not enrolled at this outdoor station.
1. Swipe admin card to enter system setting. (Orange LED is on.)
2. Long press 1st button for 3s to switch validation on/off. (Default validation is "on.")
The status on/off is indicated by the LED and sound feedback.
|
26 bit, green LED flash *1
34 bit, green LED flash *2
Switch on validation, green LED flash*1
Switch off validation, green LED flash*2
— 40 —
Tabla de contenido
