Tabla de contenido
ABB-Welcome
5.3
Pushbutton outdoor station with keypad module
The keypad module can be assembled with a
pushbutton outdoor station and users can enter the
password to open the door.
Users can enter the system settings menu by using
the following steps. (Press # to confirm and * to
cancel. The default system password is 345678.)
1.
Set the device as an outdoor station or a gate
station.
Outdoor station:
#* system password #
1 #
=>
1 #
Gate Station:
#* system password #
1 #
=>
2 #
2.
Modify "system password"
#* system password #
2 #
=>
Enter new password (6-8 bits) #
3.
Modify "door open code"
#* system password #
3#
=>
Enter new door open code (3-8 bits) #
4.
Set the voice message
If the audio module with the speech synthesis function (M251024A-.) is assembled,
the local language can be set.
#* system password #
4#
=>
Press
5.
Enable/disable access control function
Enable access control function:
#* system password #
5#
=>
1 #
Disable access control function:
#* system password #
|
=>
=>
=>
=>
=>
or
to choose the language
=>
=>
=>
Enter the password again #
=>
Enter the code again #
=>
#
— 36 —
Tabla de contenido
