Technical Specifications - Miniland digimonitor 5 Instrucciones De Uso

ENGLISH
Problem
Interference or poor
reception
You cannot charge the
battery in the parent unit
If the Baby Unit has lost
its link with the Parent Unit
6. MAINTENANCE
· Clean the surfaces of the camera and monitor with a soft, lin t-free cloth.
· If the units become dirty, use a lightly dampened cloth to wipe surfaces, taking care to not allow water into
any openings.
· Never use cleaning agents or solvents.

7. TECHNICAL SPECIFICATIONS

Frequency
Operating Range
Nº of configurable channels
Power (parent unit)
Rechargeable battery for monitor
Power (baby unit)
LCD Screen size
8. INFORMATION ON DISPOSAL OF BATTERIES AND PRODUCT
· Remember to dispose of the product in an environmentally responsible way, removing the battery first.
· Do not mix products bearing the symbol of a crossed out bin with normal household waste.
· For proper collection and processing of these products, take them to the collection points designated
by local authorities. You can also contact the store where you purchased the product.
Hereby, Miniland S.A. declares that this "89236 digimonitor 5'' is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
Possible Cause
Other electronic devices may be
interfering with the signal
The camera and monitor may be
too far apart
The battery power may be too low
The camera or monitor may be
placed too close to many metal
objects
The AC/DC adapter is not plugged
in
The camera and monitor may be
too far apart
The link between both units has
been lost momentarily
The link between bothunits has
been lost
Solution
Move them away from the device
Move the monitor closer to the camera
Plug in the power adapter
Move them away from the device
Plug in the adapter
Move the monitor closer to the camera
Reset the units by disconnecting them
from the electrical power. Wait about 15
seconds before reconnecting. Allow up to
one minute for the Baby Unit and the Parent
Unit to synchronize.
Pair the camera and monitor again. See
5.2.7.6.
2.4GHz FHSS
230m (straight line and open space)
21
Input: 100-240V CA 50/60Hz Output: 5V 800mA
3.7V 2100mAh
Input: 100-240V CA 50/60Hz Output: 5V 800mA
5''
18