Digital Zoom; Vox Mode; Removing Cameras - Miniland digimonitor 5 Instrucciones De Uso

ENGLISH
Take the following steps to activate this mode:
1. Press the Menu / Back button (5) to access the menu.
2. Press the LEFT (9) or RIGHT (8) key until the standby mode icon (C) is highlighted.
3. Press the UP (7) or DOWN (10) key to select the desired option: OFF / 1 min / 3 mins / 5 mins and press the
confirmation key to confirm (11).
Note: If the device is in Standby mode and you do not wish to wait 1, 3 or 5 minutes for the screen to turn itself
off, press the ON button (12) to turn it on immediately.

5.2.7.4. DIGITAL ZOOM

You may increase the size of the image on the screen using the zoom function if you wish.
This function is accessed via the main menu by selecting the Zoom (D) icon and the x2 option or by pressing
the zoom button (11) directly.
When the device is in this mode you can move around the screen using the (UP (7), DOWN (10), RIGHT (8) and
LEFT (9)) navigation buttons on the monitor.
The zoom icon (e) will appear at the top of the LCD screen.
You can exit this function by pressing the zoom (11) button again.

5.2.7.5. VOX MODE

This mode will enable you to control your baby monitor´s sound activation feature. If you activate the VOX mode
on the monitor and there is sound around the camera, it will stop transmitting and the monitor screen will turn
itself off.
When the camera detects a sound it will begin transmitting the signal again and the image will reappear on the
screen.
Turn off the VOX mode in order to deactivate this function.
· VOX mode OFF: The camera transmits on a continuous basis, which enables you to monitor your baby or the
area you wish to protect on a continuous basis too.
· VOX mode ON: The camera only transmits when it detects a sufficiently loud sound, which will depend on the
level selected, around the camera.
To activate this function, first of all check you have set the standby mode to 1, 3 or 5 minutes (see item 5.2.7.3).
Select 1, 3 or 5 if you want the camera to transmit after 1, 3 or 5 minutes if no sound is produced around it.
Once you have set the standby time, take the following steps to activate the VOX mode:
1. Press the Menu / Back button (5) to access the menu icon.
2. Press the LEFT (9) or RIGHT (8) key and wait for the VOX icon (E) to reappear.
3. Press the UP (7) or DOWN (10) key to select the VOX option: ON/OFF and press the confirmation key (11).
4. The VOX icon (g) will appear at the top of the LCD screen.
Note: If the device is in VOX mode and you do not wish to wait 1, 3 or 5 minutes for the screen to turn itself off,
press the ON button (12) to turn it on immediately.
5.2.7.6. ADD CAMERA
This feature is designed to enable you to view different areas with up to 4 cameras (channel 1, 2, 3 or 4 assigned
to different cameras). The monitor and the original camera leave the factory with channel 1 programmed. Take
the following steps if you need to add an additional camera:
1. Press the Menu / Back button (5) to access the menu.
2. Press the LEFT (9) or RIGHT (8) key until the add camera icon (F) is highlighted.
3. Press the UP (7) or DOWN (10) key to select the channel on which you wish to add the new camera and press
the confirmation key (11).
4. While the on/ link LED indicator on the monitor (2) is flashing, press the pairing button on the camera (VI).
5. Once paired, the LED indicator will stop flashing and the camera images will immediately appear on the
monitor screen.
6. Repeat the aforementioned steps if the pairing has not been conducted correctly.
Note 1: Only the channels on which no camera has been paired can be selected.
Note 2: The connection between the monitor and a camera that has already been paired may be lost due to
a variety of reasons. In this case repeat the process detailed above in order to connect the new camera to the
monitor.

5.2.7.7. REMOVING CAMERAS

Take the following steps in order to remove one of the connected cameras:
1. Press the Menu / Back button (5) to access the menu.
2. Press the LEFT (9) or RIGHT (8) key until the remove camera icon (G) is highlighted.
3. Press the UP (7) or DOWN (10) key to select the camera you wish to remove and press the confirmation key (11).
4. Use the UP (7) and DOWN (10) keys to select the option to definitively remove the camera and press the
confirmation key (11).
5. Press the Menu / Back key (5) to return to the main screen.
16