Timer Setting - Olimpia splendid NEXYA S3 Manual De Usuario

4 The button FAN SPEED and ECONOMICAL are invalid in the mode DEHUMIDIFY)

TIMER SETTING

Button TIMER ON can set the starting time.
Button TIMER OFF can set the stopping time.
Only set the time of TIMER ON
1) Push button TIMER ON, the wire controller display SETTING, the icons of HOUR and ON display on the timer setting
area. The wire controller enter into the setting of timer on.
2) Push button TIMER ON again, and then adjust the time of timer on as your desired.
3) Continuously push the button, the time of timer will increase 0.5 hours per time. After the time of timer reaches to 10
hours, the time will increase 1hour each time.
4) 0.5 seconds later, after finishing the adjustment, the wire controller sends the information of time on, the timer on
setting is completed.
Only set the time of timer off
1) Push button TIMER OFF, the wire controller display SETTING, the icons of HOUR and OFF display on the timer setting
area. The wire controller enters into the setting of timer off.
2) Push button TIMER OFF again, and then adjust the time of timer off as your desired.
3) Continuously push the button, the time of timer will increase 0.5 hours per time. After the time of timer reaches to 10
hours, the time will increase 1hour each time.
4) 0.5 seconds later, after finishing the adjustment, the wire conditioner sends the information of timer off, the timer off
setting is completed.
Set the time of TIMER ON and TIMER OFF simultaneously
1) Refer to step 1 and step 2 of TIMER ON to set the TIMER ON.
2) Refer to step 1 and step 2 of TIMER OFF to set the TIMER OFF.
3) When set the TIMER ON and TIMER OFF simultaneously, if the set times of TIMER ON and TIMER OFF are all over
10hours, then TIMER OFF is always later 1hour than TIMER ON.
4) 0.5 seconds later, after finishing the adjustment, the wire controller sends the information of timer onf, the timer off and
timer on setting are completed.
Alter the timer
To alter the time of TIMER ON of TIMER OFF, push the timer button to confirm once more. Adjust the time of TIMER ON
and TIMER OFF as 0.0 to cancel the TIMER ON of TIMER OFF:
Remark: the time of TIMER ON is the relative time; it is relative to the standard time of operating wire controller. If having
set ting the TIMER ON or TIMER OFF, then the clock cannot be adjusted.
Cancel the filter cleaning icon
1. When the calculated operating time reach the setting filter cleaning time, the filter cleaning icon will be lighted up, to
remind the user to clean the filter screen; after cleaning it can long press the "ECO" key for 3 seconds to cancel the icon.
Technique certification and requirement
EMC and EMR should conform to the CE certification.
38