Operating Faults; General Servicing; Power Cable; Water Tank - Spinel JASMINE Serie Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 143
WARNING: Contact with the steam can cause severe burns. Do not spill the milk to
prevent burns to the hands.
WARNING: In case the right water tank is empty, the unit is safe and gives alarm
signal. To reset the unit, turn off the machine, fill water in the tank and then turn it on.

OPERATING FAULTS

The machine may not work because:
The plug hasn't been inserted into the socket;
The main switches haven't been pressed;
No water in the reservoir;
Filters are blocked.
The cause of failure in preparation of the drink can be:
The capsule holder is not properly closed;
An exhausted capsule is being used ( is a single dose capsule);
The capsule is stuck inside the capsule holder door: in this case empty the exhausted
capsule drawer;
If the cause of the failure does not correspond to those listed above, it is necessary to contact one
of our service centres.

GENERAL SERVICING

POWER CABLE

Regularly check the power cable. If it is worn or damaged, it should be replaced by authorised
personnel.

WATER TANK

Regularly check the water level and top up as necessary.
Water level must not exceed 90% of tank capacity in order to avoid any overflowing.

CLEANING AND MAINTENANCE

For a proper usage of the machine and a high standard quality coffee, it is highly recommended to
regularly clean the machine. These operations have to be done when the machine is cold and
unplugged to the power supply.

DRIP TRAY CLEANING:

Empty the tray daily and wash with warm water.

EXHAUSTED CAPSULE DRAWER CLEANING:

Periodically empty the exhausted capsule drawer and rinse it with warm water.
42
Spinel S.r.l.

Hide quick links:

Tabla de contenido
loading

Productos relacionados para Spinel JASMINE Serie

Este manual también es adecuado para:

Jasmine 1Jasmine 2Jasmine 3

Tabla de contenido