Spinel JASMINE Serie Manual De Instrucciones página 37


The power supply must be equipped with grounding: the manufacturer cannot be held
responsible for any accidents caused by the lack or non-compliance with the laws of the
grounding system.

To avoid damage to people or to device, do not place the power cable in hazardous areas.

To keep the machine working perfectly it is essential to use exclusively parts provided by the
manufacturer Spinel s.r.l.

Periodically check the power cable. A worn cable is a serious electrical hazard, if necessary,
it has to be replaced by authorized personnel only.

The plug for connection to the power supply cannot be replaced.

The machine must be installed:
- In places where the room temperature is between + 5 ° C to + 50 ° C with relative
humidity not exceeding 80% absolute;
- In a place where its use and its maintenance can be carried out only by trained personnel;
- On a flat surface, in ventilated areas, away from water taps, and sinks.

Never install/use the machine:
- outside;
- on electric or gas rings, or inside a hot oven;
- if the power cable or plug are damaged, if the machine shows signs of operating
incorrectly or if it has suffered any damage;
- in areas where jets of water may be used.

Never touch a hot surface.

In case of failure or malfunction, switch the machine off and do not tamper with it. For any
possible repair, call only a Service Centre authorized by the manufacturer. Failure to do so
may compromise the security of the device.

To protect against fire, electric shock or injury do not immerse cable, plug or appliance in
water or other liquid.

Before disconnecting the power cable, make sure that all switches are OFF.

Disconnect the plug from the power supply in case of:

Non-use of the machine;

Cleaning of the machine;

Filling the tank (O) with water.

Never put hands, metal objects or other inside the machine when it is connected to the power
supply.

The user should never access those parts of the machine whose protections are blocked by
means that require a tool to be released.

Before cleaning, let the machine cool down, in order not to affect the outer parts of the
machine, we recommend the use of neutral or for food detergents.

The unit must never be washed with water jets.

Never immerse the machine in water or put it in the dishwasher.
Spinel S.r.l. 35