Riceiving And Unpacking; Side Assembly - Spinel JASMINE Serie Manual De Instrucciones


The use of attachments not recommended by the manufacturer may cause fire, electric shock
or injury to persons

In case of incompatibility between the socket and the appliance plug, have to replace the
socket with another suitable type by qualified personnel.

The machine is equipped with a heated cover used as cup warmer that keeps the cups at the
ideal temperature.
• The surface
• Do not touch the surface of the cup warmer with unprotected parts of the body.
• Do not cover the machine and / or the cup warmer with other covering elements (e.g.
cloth).

RICEIVING AND UNPACKING

The capsule coffee machine JASMINE mod. JASMINE is packed in box with inside upper and
lower shaped section. Open the box and remove the protective sheets in order to take hold of the
bottom of the machine. Rest the machine on a flat surface for the preliminary operations and to
check the machine's integrity.
For any doubts, please call any of Spinel service centres.
Forwarders will be held responsible for any breakage or failure related to transport.

SIDE ASSEMBLY

The sides need to be assembled according to the instructions below:
- the back panel needs to be fitted into the special housing;
- the two sides need to be fitted and each one assembled with the two screws and rubber washers
provided inside the packaging.
36
WARNING
of the cup
Figure 4 – Side assembly
warmer temperatures is very high.
Spinel S.r.l.