Elite SI 9200 MP Manual De Instrucciones página 33

Safety Precautions
Read entire section before starting installation
WARNING!
Electric Shock can kill – Only qualified personnel should perform this installation. Do not
touch electrically live parts. Always connect the machine to an earthed mains supply.
Select suitable location
Place the welder where clean cooling air can freely circulate in and out of the front & rear
louver vents. Dirt, dust or any foreign material that can be drawn through vents into
welder must be kept to a minimum. Failure to observe these precautions can result in
excessive operating temperatures which can lead to plant failure.
Grinding
Do not direct grinding particles towards the welder. An abundance of conductive material
can cause plant failure.
Stacking
This machine cannot be stacked.
Transport – Unloading
Never underestimate the weight of equipment, never move or leave suspended in the air
above people.
WARNING!
Falling Equipment can cause injury. Never lift welder with gas bottle attached. Never lift
above personnel.
Tilting
Machine must be placed on a secure level surface