4-Wire Cord Connections - Haier HLF11E Manual Del Usuario

4-Wire Cord Connections

green
ground
screw
green neutral
ground wire
red
power cord
1. Remove the screws securing the terminal block access cover
and the strain relief mounting bracket located on the back
of the dryer upper corner.
2. Install a U.L. approved strain relief into the power cord entry hole
of the mounting bracket. Finger tighten the nut only at this time.
3. Remove the green neutral ground wire from the green ground
screw located above the terminal block.
Typical
Conductor
Receptacle
Typical
4 Conductor
Cord
green power cord
ground wire
white
strain relief
mounting bracket
30 AMP NEMA 14-30 TYPE SRDT OR ST
silver terminal
terminal block
black
tighten nut to
these threads
nut
black 240V
white neutral
red 240V
green ground
English
20