Specifications - Premium PWA1210N Manual De Usuario

Problem
Air conditioner
cooling, but room
is too warm- NO
ice forming on
cooling coil behind
decorative front.
Air conditioner turns on
and off rapidly
Noise when unit is
cooling
Water dripping
INSIDE when
unit is cooling.
Water dripping
OUTSIDE when
unit is cooling.

SPECIFICATIONS

Unit dimensions:
MODEL(Btu/h)
<9000
9000<Model<12000
12000<Model<18000
> 18000
Solution
Dirty air filter- air restricted. Clean air filter. Refer to Care and Cleaning section.
Thermostat set too warm. Turn thermostat clockwise to a colder setting.
Air directional louvers positioned improperly. Position louvers for better air distribution.
Front of units is blocked by drapes, blinds, furniture, etc. - restricts air distribution.
Clear blockage in front of unit.
Doors, windows, registers, etc. Open- cold air escapes. Close doors, windows, registers.
Unit recently turned on in hot room. Allow additional time to remove Stored heat from
walls, ceiling, floor and furniture.
Dirty air filter- air restricted. Clean air filter.
Outside temperature extremely hot. Set to high cool to bring air
past cooling coils more frequently.
Air movement sound. This is normal . If too loud, turn selector to
lower FAN setting.
Sound of fan hitting water-moisture removal system. This is normal
when humidity is high. Close doors, windows and registers.
Window vibration - poor installation. Refer to installation instructions
or check with installer.
Improper installation. Tilt air conditioner slightly to the outside to
allow water drainage. Refer to installation instructions - check with
installer.
Unit removing large quantity of moisture from humid room. This is
normal during excessively humid days.
BODY DIMENSION(mm)
(W x H x D)
450x345x560
600x380x560
661x428x675
661x428x675
12