Vent Control; Care And Cleaning - Premium PWA1210N Manual De Usuario

Vertical air flow adjustment (manually)

Vent Control

The vent control is located above the control knobs. The operation method is different
on different models (see the following figures).
For maximum cooling efficiency, CLOSE the vent. This will allow internal air circulation.
OPEN the vent to discharge stale air.
CLOSE
To open the vent, pull the lever toward you
To close it, push it in.
NOTE: The VENTILATION LEVER should normally be kept in the CLOSED position during
cooling for maximum cooling effect. The "OPEN" position is used only for ventilation.
Clean your air conditioner occasionally to keep it looking new. Be sure to unplug
the unit before cleaning to prevent chock or fire hazards.
To adjust vertical air flow direction, adjust any one of
the horizontal louver blades. When turning up or down
the horizontal louver blades, always keep horizontality
the top or bottom blades. This can effectively prevent
water drops condensed on the front panel of the unit.
VENT OPEN

CARE AND CLEANING

To open the vent, set the lever to the right position
To close it, set the lever in the left position.
CAUTION CAUTION
Air Filter Cleaning
The air filter should be checked at least once a
month to see if cleaning is necessary. Trapped
particles in the filter can build up and cause an
accumulation of frost on the cooling coils.
7
CLOSE OPEN