Premium PWA1210N Manual De Usuario página 22

THERMOSTAT
THERMOSTAT
6
3
1
COOLER
AUTO SWING
Horizontal air flow adjustment (automatically)
Thermostat
The thermostat is used to set the desired room
temperature when the unit is being operated in
the COOL MODE.
To set the desired room temperature, rotate the
thermostat switch to the desired setting. After
the set temperature is achieved the thermostat
will automatically start and stop the compressor
9
in order to maintain the desired set temperature.
Rotate the thermostat selector clockwise for
higher cool settings. Higher cool settings will
provide lower room temperature. Rotate the
thermostat selector counter clockwise for lower
cool settings. Lower cool settings will provide
higher room temperature.
NOTE: During the cooling operation of the unit, when the
thermostat knob is rotated clockwise, allow at least three
minutes before turning back the knob to the COOLER
direction. Otherwise the fuse may blow due to an overload
of the unit.
When the AUTO SWING switch is turned to
position, the vertical louvers automatically oscillate
right and left sweeping the cold air alternately to
obtain comfortable cooling. The vertical louvers may
be stopped at any position when the AUTO SWING
switch is turned OFF .
6
AUTO SWING
ON
OFF
ON