Ritmo ELEKTRA LIGHT Manual De Instrucciones Y Mantenimiento página 33

MENÙ 4/8 (PRINTING AND USB CONNECTION)
PRINTS AND USB
SAVE DATA VIA USB
INSERT MEMORY AND WAIT COPY
PRINT LAST REPORT
PRINT ALL REPORTS
Note: This section requires the use of
a printer or a USB flash drive.
Before proceeding
operations hereunder described, be
sure to have at hand the serial/USB
adapter cable, the USB flash drive
and, in case you want to print the
welding reports, the serial printer.
Press OK to access the submenu.
Use the B pushbuttons to choose the
option you want. Press OK to
confirm.
Press OK.
Connect the USB flash drive to start
the automatic transfer of the data.
Wait until "OK!" is displayed.
Note: you can save the data in
1. PG1 format, which is readable
only with Ritmo
Software
2. PDF format
Read the paragraph 'MENU 5/8
(Other Functions)' for further info.
Connect the printer and press OK.
Wait print completion.
Note: If OK is pressed before the
printer is connected, or when the
USB flash drive is connected, the
message "NOT READY" is displayed.
Press STOP to return to the main
menu
with the
Transfer
EN
33