DeWalt D25414 Manual De Instrucciones página 31

OPERATION
WARNING: Always observe the safety instructions and applicable
regulations.
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
Proper Hand Position (Fig. 5)
WARNING: To reduce the risk of serious personal injury, ALWAYS
use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS
hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the side handle (C), with
the other hand on the main handle (B).
FIG. 5
C
Depth Rod (Fig. 6)
TO ADJUST THE DEPTH ROD
1. Push in and hold the depth rod release button (E) on the side
handle.
2. Move the depth rod (D) so the distance between the end of the
rod and the end of the bit equals the desired drilling depth.
3. Release the button to lock rod into position. When drilling with the
depth rod, stop when end of rod reaches surface of material.
FIG. 6
D
Reversing Lever (Fig. 7)
The reversing lever (I) is used to reverse the rotary hammer for backing
out fasteners or jammed bits in drill-only mode.
WARNING: When reversing to clear jammed bits, be ready for
B
strong reactive torque.
To reverse the rotary hammer, turn it off and position the reversing
lever (I) to the right.
To position the lever for forward operation, turn the rotary hammer off
and push the reversing lever (I) to the left.
29
E