DeWalt DW325PT Manual De Instrucciones página 48

Clavadora estructural de 30 para cinta de papel; clavadora para moarcos de 21 con unión de plástico
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

industrial 23+ cFM
Industriel 23 pieds cubes par minute et +
industrial 23+ cFM
8 hP gas 14 - 16 cFM
8 ch essence 14 à 16 pieds cubes par
minute
8 cv gas 14 -16 cFM
5.5 hP gas/2 hP elec. 8 - 9 cFM
5.5 hP essence/ 2 ch Élec. 8 à 9 pieds
cubes par minute
5.5 cv gas/ 2 cv elec. 8 -9 cFM
Portable handcarry 3.2 - 4 cFM
Portable à la main 3,2 à 4 pieds cubes
par minute
Transportable 3.2 - 4 cFM
Compressor will be sufficient for tools at all production rates.
Le compresseur sera suffisant pour les outils à tous les taux de production.
El compresor será suficiente para las herramientas a cualquier velocidad de
trabajo
Compressor will be sufficient at slow or moderate production rates, but may
have difficulty at very rapid rates.
Le compresseur est suffisant pour les cadences de production lentes ou
modérées, mais son rendement pourrait être insuffisant pour les cadences
très rapides.
El compresor será suficiente a velocidades de trabajo bajas o moderadas, pero
puede tener dificultades en velocidades muy rápidas.
(NOV14)
The following are trademarks for one or more D
of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
9R208191_DW325PL_DW325PT_DEWALT, FRAMING NAILER(LPF).indd 46
1
2
nuMBer oF tools connected to coMPressor
noMBre d'outIls raccordÉs au coMPresseur
núMero de herraMIentas conectadas al coMPresor
D
WALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286
e
Part No. 9R208191
DW325PL, DW325PT
WALT power tools: the yellow and black color scheme; the "D" shaped air intake grill; the array
e
6
3
4
5
Compressor will be adequate only when tools are utilized at slow production
rates. (punch-out or occasional use)
Le compresseur est adéquat uniquement quand les outils sont utilisés à des
cadences de production lentes (perforation ou utilisation occasionnelle).
El compresor sólo será adecuado cuando las herramientas se utilicen en
velocidades de trabajo lentas (perforación o uso ocasional).
Not Recommended
Non recommandé
No recomendado
Copyright © 2014 D
7
8+
WALT
e
11/14/14 3:06 PM
Tabla de contenido
loading

Este manual también es adecuado para:

Dw325pl

Tabla de contenido