Ec Declaration Of Conformity; Designated Use; Safety Regulations - IPC ECR dual-clean Manual De Instrucciones

CLASSIFICATION OF RISKS:
!
Danger
Identifies an imminent risk which could lead to serious or fatal
injury.
!
Important
Identifies a risk situation which could lead to serious injury.
Information
Identifies a risk situation which could lead to minor injury or
damage to things.
!
Important
You must read this manual before installing, starting up and
using the hydroblaster.
This manual is an integral part of the product.
It consists of two parts, one is yellow.
Read the warnings and instructions contained in the manual
carefully as they provide important information on USER SA-
FETY and MAINTENANCE, paying particular attention to the
general safety regulations in the yellow annex.
KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE
REFERENCE.
!
Important
Those operating and servicing the hydroblaster must be aware
of the contents of this manual.
The user must respect the conditions for using a hydroblaster
specified in current regulations and standards.
The hydroblaster is regulated in the factory and all safety devi-
ces are sealed. They must not be adjusted.
The hydroblaster with internal combustion engine is petrol
fuelled. Use fresh clean lead-free petrol.
Do not use petrol from the previous season or stored for long
periods. Lead-free petrol must not be kept for excessively long
periods.
The hydroblaster must always be used on firm flat ground. It
must never be moved while in operation.
The hydroblaster is considered as a permanently installed
appliance.
Failure to respect this classification may be a cause of danger.
The hydroblaster must not be used in the presence of corrosive
or potentially explosive atmospheres (vapours or gases).
Incorrect use of the hydroblaster may cause damage to people,
animals or things and absolves the Manufacturer of all liability.
PREFACE
English
"EC" DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product to
which this declaration relates is in conformity with the Euro-
pean directives listed:
Applied harmonised standards:
EN 12100.10 - EN 60335-2-79 - UNI EN ISO 3744.
The appliance is designed exclusively to clean graffiti, smog, bird lime, rust, moss and lichen from walls, facades and public
transport vehicles, for cleaning and servicing machinery and
equipment and in general for use on all surfaces suitable for
cleaning with a mixed jet of inert media at a high pressure of
between 25 and 250 bars. (360 - 3600 PSI).
This appliance has been designed for use with inert media
supplied or recommended by the Manufacturer. The use of
other products or chemicals may jeopardise the safety of the
appliance.
This appliance must be used exclusively for the purposes for
which it was designed.
All other uses are considered improper and unreasonable.
Examples of unreasonable use include:
- Washing surfaces not suitable for treatment with a high pres-
sure jet.
- Washing people, animals, electrical appliances and the
appliance itself.
- Use of unsuitable products or chemicals.
- Blocking the lance trigger in the delivery position.
Improper, incorrect or unreasonable use absolves the Manu-
facturer of all liability.
All hydroblasters are constructed in compliance with current
safety standards and regulations.

SAFETY REGULATIONS

HIGH PRESSURE HOSE:
!
Danger
- Use original high pressure hoses only.
- Check the high pressure hose daily. Do not use hoses if
visibly damaged.
- Do not use hoses if the threading on the couplings is da-
maged.
- Do not use high pressure hoses which have been bent.
- Do not use high pressure hoses if the steel braiding is visible
on the surface.
- Protect the high pressure hose from accidental crushing.
- The high pressure hose must never be placed under mecha-
nical stress.
- 16 -
2006/42/CE

DESIGNATED USE