Care And Maintenance - miniland baby thermoadvanced plus Manual De Instrucciones

9.3. TIPS FOR USING THE eMyBaby App
1. Make sure that your smartphone or tablet is running on the latest operating
system. For information about software updates, see the instructions for your
device.
2. Make sure that your eMyBaby app is updated at regular intervals.
For information about app updates, see the instructions for your device.
3. For the communications module to function correctly, the mobile device has to
be the sufficiently charged. Users should have a power supply unit or a charging
device to hand.
4. Make sure that there is always enough memory available to back up the
reading data on your smartphone or tablet.
5. If you receive a call or a text message during a reading, the reading could be
cancelled or it can provide an inaccurate information. We recommend switching
your device to flight mode.
6. If you are in a noisy environment hold the Thermoadvance speaker as close as
you can to your smartphone device. Under normal quiet use the Thermoadvance
and smartphone device can be 30cm (12") apart.
7. There is always the possibility that future updates to the eMyBaby app may
render this guide outdated.
10. PRODUCT CARE

10.1. CARE AND MAINTENANCE

• Prevent the product getting wet, if it does get wet please dry thoroughly. Please
note that corrosive liquids may cause damage.
• Please use and preserve at a normal temperature, the product life will be
shortened if temperatures are excessively high or low.
• To ensure accurate measurements, keep the probe tip clean and free of
scratches. Finger prints or dirt will affect the accuracy of the thermometer.
• In order to get an accurate reading, please clean the probe tip.
• To clean the sensor, gently wipe is surface with a cotton swab slightly moistened
with alcohol and immediately wipe dry with a clean cotton swab.
• Use a soft dry cloth to clean the body of the thermometer. Never clean the
thermometer with abrasive cleanser, thinner, benzene or submerge the
thermometer into water or other liquids.
After cleaning, allow at least 20 minutes drying time before taking temperatures.
Place the thermometer in the protective case or table stand holder. Store it in a
dry, clean place at room temperature
10.2. CALIBRATION
The thermometer is initially calibrated at the time of manufacture. If the
thermometer is used according to the instructions, periodic recalibration is not
required. If any time you question the accuracy of the reading, please contact the
retailer immediately.
Don't attempt to modify or reassemble the thermometer.