miniland baby thermoadvanced plus Manual De Instrucciones página 25

3. Press the talk button [ ] to hear the currently selected stored temperature
data. Press any button to stop the sound during the announcement.
4. Maximum storage capacity is 9 sets of data showing memory number,
temperature, time taken and date taken.
5. Press the object button [ ] and forehead button [ ] at the same time to revert
back to standby mode.
Note: Device will not store temperatures taken via the object button [ ].
Memory Number Temperature Time Taken Date Taken
8. ADVANCED SETTINGS
8.1. FAHRENHEIT/CELSIUS SETUP
When not in standby mode i.e. after taking a temperature reading or when
displaying memory temperature, press and hold talk button [ ] about 3 seconds
this will change the mode to either ºF or ºC.
Press the Set/Mem button [ ] to revert back to standby mode.
8.5 DATE AND TIME SETUP
1. Whilst in standby mode, press and hold Set/Mem button
[ ] about 2 seconds to enter into setup mode. The current
clock mode will flash indicating whether it is in 24hr or 12hr
mode.
2. Press Set/Mem button [ ] again to swap between 24hr
and 12hr mode and then press the talk button [ ] to set the
clock mode.
3. The hour digits will flash indicating you are in setup mode.
4. The device will automatically exit setup mode 30 seconds
after the last button has been pressed.