Factory Settings - Baxi LUNA 3 COMFORT MAX Manual Para El Usuario

MonDy Day 1
tueDy Day 2
WeDDy Day 3 (wednesday)
thuDy Day 4 (thursday)
FriDy Day 5
satDy Day 6 (saturday)
sunDy Day 7
To set a single time band, proceed as follows:
1) Press the ip button and then the button
2) choose a day of the week (1...7) by repeatedly pressing the
buttons +/- ;
3) press the oK button;
4) the display shows the message on 1 and the 4 digits of the time
flashing, as shown in the figure below;
5) use the buttons +/-
6) press the oK button;
7) the display shows the message of 1 and the 4 digits of the time
flashing;
8) use the buttons +/-
9) press the oK button;
10) repeat the same operations (from point 4) to set the remaining
three time bands;
11) press the IP button to ex­it the function.
programming in
heatinG MoDe
note: By setting the lighting time on... equal to the switching off time of..., the time band is cancelled and the program
goes to the nex­t time slot.
(ex­. on1=09:00 - of1=09:00 the programme "skips" time band 1 and continues with on2...).
3.6.2. Groups of days
This function enables the programming of 4 common boiler activation and deactivation time slots for several days or the
entire week (see the summary table below).
To set a single time band, proceed as follows:
1) Press the ip button and then the button
2) Select a GROUP of days by repeatedly pressing the buttons +/-
3) press the oK button
4) repeat the operations described in points 4-10 of paragraph 3.6.1.
instructions pertaininG to the user
On 1 Of 1
(monday)
(tuesday)
06:00 08:00
(friday)
(sunday)
;
to set the boiler lighting time;
to set the boiler switching off time;
;

Factory settinGs

On 2 Of 2 On 3
11:00 13:00 17:00
proGraMMeD tiMe BanD
;
46
Of 3 On 4 Of 4
23:00 24:00 24:00
09:00 - 12:00
Day of the week
Monday
925.480.1 - GB