Common Service Parts - Craftsman CMXGWAS020733 Manual Del Operario

Ocultar thumbs Ver también para CMXGWAS020733:

Guía rápida de arranque/apagado (2 páginas)

Tabla de contenido

Idiomas disponibles

Maintenance

Service Air Cleaner

WARNING! Fuel and its vapors are extremely

flammable, which could cause burns or fire,

resulting in death or serious injury .

• Do not start and run engine with air filter removed .

Your engine will not run properly and may be damaged if

you run it with a dirty or missing air cleaner .

1 . Pull the latch and open the cover .

Air Cleaner

2 . Carefully remove air cleaner to prevent debris from

falling into carburetor .

3 . To loosen debris, gently tap the air cleaner on a hard

surface . If the air cleaner is excessively dirty, replace

with a new air cleaner .

4 . Reinstall clean or new air cleaner in base .

5 . Close the cover and secure the latch .

Service Spark Plug

Changing the spark plug will help your engine to start

easier and run better .

1 . Clean area around spark plug .

2 . Remove and inspect spark plug .

3 . Replace spark plug if electrodes are pitted, burned

or porcelain is cracked . Use the recommended

replacement spark plug . See Common Service Parts.

4 . Check electrode gap with wire feeler gauge and reset

spark plug gap to recommended gap if necessary (see

Specifications) .

5 . Install spark plug and tighten firmly .

Inspect Muffler and Spark Arrester

Inspect the muffler for cracks, corrosion, or other damage .

Remove the spark arrester, if equipped, and inspect for

damage or carbon blockage . Clean if carbon blockage is

found using brush and commercial solvent or replace if

damaged .

Latch