First Functioning Operation Of Heating Installation; Positioning Scheme Cap Lever Cleaning; Connection To The Chimney - Lincar Lola Manual Del Usuario

Position selector circulator OPERATION ( In function
•
MAX

First functioning operation of heating installation

During the first hour of functioning, we recommend to employ the equipment on power 1
( minimum ) this to check the functioning of the entire heating installation to avoid that
"particular" temperatures are reached.

POSITIONING SCHEME CAP LEVER CLEANING

The stove is equipped with a cleaning lever cap, placed in the envelope Accessories,
•
gently place latching on Upper Front. The proper unit operation with cleaning lever fitted
cap.

Connection to the chimney

Before connecting the appliance, verofy if the technical data reported on the technical
•
correspond to the ones you have required at the moment of purchaser.
All heating biomass equipments, especially wood and pellet appliances, have to evacuate
•
the combustion products in a flue, which must be built in conformity with normative in
force
The following instructions describe „ informations for a good installation „ and they refer
•
to normatives in force, but they are not to be considered exhaustive for installations laws
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES
GB GB FR FR
When the venting phase is finished, the
circulator selector has to be placed in the
same position as in the picture. (Rotate
clockwise at the stroke end).
43/140
ES mod. 540 VT – 540N VT
ES ES
)