MESTO RS120 Instrucciones De Uso página 17

GB
IRL
Have damaged parts or parts that do not work properly repaired immediately by
our customer service department or by service partners authorized by us.
Preparation
Follow the instructions in the section entitled „Safety".
The device must be in an upright position.
into the tank.
1. Screw the cover [19] off the tank. (Fig. 6)
3. Screw the cover [19] onto the tank. (Fig. 6)
Spraying
Follow the instructions in the section entitled „Safety".
Operate the device only while it is vertical or suspended upright and nearly
vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Follow the instructions of the spray product manufacturer!
1. Place the device on its back. (Fig. 8)
2. Using the pump lever [11], pump slowly and regularly to maintain a continuous spraying
3. Ensure that the optimum spraying pressure is set on the pressure gauge [22] (Figs. 8
and 9).
Nozzle
Pressure
2.0 bar
6.0 bar
Table 2. Dependence: Spraying rate – spraying pressure
AUS
USA
1.1 (Basic equipment)
0.56
0.96
17
NZ
CDN
80015 8002
0.48
0.85
IND
0.65
1.13