Electronic Equipment; Remote Control - Italiana Camini POINT Instalación Uso Y Mantenimiento

REMOTE CONTROL

SYMBOLS KEY
3: on/off key, hold down for 2 seconds (short beep con rms when switched on, long beep con rms when switched off)
1: key to increase the desired room temperature (SET ROOM)
2: key to reduce the desired room temperature
6: key for setting the working power (SET POWER)
5: key for decreasing the working power
4: key to open the menu
- the remote control transmits by means of an infrared signal within a range of 4-5 metres.
The LED transmission signal must be in line with the receiving LED of the stove for the signal to be transmitted correctly. This
must also be in a free- eld environment, therefore, free of obstacles.
- The remote control works with 3V battery. Battery duration depends upon usage, however, the average duration is that of an
entire season.
To replace the battery, remove the door, Y, where the battery is housed.
The discharged battery should be properly disposed of in accordance with current regulations in force.
- the remote control must be cleaned with a damp cloth and no detergents or liquids must be sprayed onto it. In any case, use
neutral detergents which are free from aggressive substances.
- handle the remote control with care. It could easily break if dropped, due to its size.
NOTES:
- Operating temperature:
- Storage temperature:
- Operating humidity is:
- Degree of protection is:
- Weight with battery inserted:

ELECTRONIC EQUIPMENT

0-40 °C
-10/+50°C
20-90% R.H with no condensation
IP 40
15 gr
Y
- 184
-