Makita DFL201R Manual De Instrucciones página 4

ENGLISH
(Original instructions)
1 Red part
2 Button
3 Battery cartridge
4 Switch trigger
5 Reversing switch lever
6 Lamp
7 LED#A
SPECIFICATIONS
Model
Hard joint
Fastening
torque
Soft joint
Square drive
No load speed (min
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS SCREWDRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
4
Explanation of general view
8 LED#B1
9 LED#B2
10 Screw
11 Angle head
12 Hole for adjusting grip
13 Ring
14 Scale
DFL201R
10 – 20 N•m
10 – 20 N•m
9.5 mm
–1
) 360
429 mm x 72 mm x 98 mm
1.7 kg
DFL301R
16 – 30 N•m
16 – 30 N•m
9.5 mm
477 mm x 72 mm x 98 mm
2.0 kg
D.C. 14.4 V
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
ENE033-1
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
GEA010-1
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
GEB050-2
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
15 Adjusting grip
16 Yellow line
17 Compression spring
18 Socket
19 Hole
20 Pin
260
477 mm x 72 mm x 98 mm
DFL402R
25 – 40 N•m
25 – 40 N•m
9.5 mm
200
2.0 kg
ENC007-5